High production deep hole drilling machines

Multiple spindles =

High Production!

Produce 100's or even thousand's of parts per day!

From two to six spindles all on a single base.

Increase production dramatically.

Save floor space.

Only one operator required.

Diameters from .500" to 1.00"

Auto load/unload part transfer system.

Depths up to 30"

Gundrill or BTA tooling.

Common applications: Transmission shafts, Steering racks, Camshafts, Track pins, Rifle barrels.

TDS-Pacesetter IV

Four spindle Gundrill

Capacity: to .500" diameter.
Drilling strokes: 12" to 24"
3 HP variable speed each spindle.
Up to 10 GPM each spindle.
Filtration to 5 micron
Touch screen operator station with programmable depth, rpm and feed-rates.
Heavy-duty full safety guarding.
Automatic part transfer.

Application: Transmission shafts.

TDS-Pacesetter VI

Capacity: to 1.00" diameter.
Drilling strokes: 18" to 30"
7.5 HP variable speed each spindle.
Up to 15 GPM each spindle.
Filtration to 5 micron
Touch screen operator station with programmable depth, rpm and feed-rates.
Heavy-duty full safety guarding.
Automatic part transfer.

Six spindle Gundrill

Application: Track pins

TDS-Pacesetter IV BTA

Capacity: to 1.00" diameter.
Drilling strokes: 18" to 30"
10 HP variable speed each spindle.
Up to 20 GPM each spindle.
Filtration to 5 micron
Touch screen operator station with programmable depth, rpm and feed-rates.
Heavy-duty full safety guarding.
Automatic part transfer.
Secondary cross drill operation.

Application: Steering racks.

Home Gundrill machines BTA machines Multi-Axis High-production Special projects Drilling services Drilling Faqs Contact us Company info Location/Map

Contact us!